manualshive.com logo in svg

THOMSON Grass Valley Zodiak, Release Notes

Share
Download
THOMSON Grass Valley Zodiak Release Notes Download Page 24

24

Zodiak Release Notes

Version 4.0 

 

The following three options are available. Only one can be selected at a 
time. 

•

Install new version of software

 — Select this option if you are updating 

your system software. It installs new software from the inserted 
CD. The 

Browse

 button is intended for software installation over the 

network, if the CD disk is not available. 

•

Install current version of software

 — Re-installs the currently loaded 

version of software from Menu Panel hard drive. This is generally 
used to install the current software on new Zodiak hardware 
attached to the system.

•

Reinstall previous version of software

 — Installs the previously loaded 

software from the Menu Panel hard drive. 

9.

Select 

Install new version of software

 option then touch the 

Next>

 button. 

Figure 16.  Install New Version of Software Selected

The following Zodiak system component installation options are avail-
able. Only the software of the selected targets will be affected. 

•

Menu System

 — Installs the Zodiak menu application software onto 

the Menu panel hard disk. 

•

Main Panel

 — Installs software to the Zodiak Main panel. 

•

Frame

 — Installs software to the Video Frame. 

Note

Typically check all boxes when installing a new software version. 

Summary of Contents for Grass Valley Zodiak







































Reviews:

No comments

Brands by name

Popular brands

Load more brands