4
The Danaher Motion family of actuator controls provides a choice of separate or combined power supplies and controls
with the manual or automatic controls needed for your application.
MCS-2015
A power supply for use with a remote control station,
photoscanner or programmable controller to run any 4
VDC actuator. 5/30 VAC input, 4 VDC output, thermal
overload protection, fused, power on/off switch.
MCS-2025
Combines the power supply of the MCS-05 and the
control of the PC compatible MCS 00 in a single enclosure
for ease of installation and wiring.
MCS-2020
A control that can be used with the MCS-05 or other or
4 VDC power sources. Provides extend, retract, jog, run and
auto return functions. Programmable controller compatible,
or 4 VDC input-output.
MCS-2035
Combines the power supply of the MCS-05 and the
control of the PC compatible MCS-030 in one enclosure
for ease of installation and wiring.
MCS-2030
Same as the MCS-00 but includes an analog meter to
display the position feedback from the Electrak 00.
MCS-2041
MCS-2042
Electrak 5 controls which switch both the actuator motor and
anti-coast brake. Rocker switch on control face extends and
retracts actuator. Includes motor run capacitor.
MCS-2005
A simple control which converts a 0 VAC input to 4 VDC
to operate an Electrak actuator. Rocker switch controls
extend/retract of actuator.
MCS-2041 115 VAC
MCS-2042 230 VAC
Controls
