Recording functions
24
7.
Recording quality
Select a recording quality from the 6 proposed using the
key.
*1: Best, *2: High, *3: Good, *4: Normal, *5: Basic, *6: Low.
Note: the choice of quality allows an adaptation to the
remaining recording time on a DVD disc. The lower the quality is,
the more space there will remain on the disc. For example with
a DVD disc of 4.7 Gb using “
Low
” quality will give around 8
hours recording time, while “
Best
” quality will only give around
60 minutes. The figure
1
to
6
is displayed in the information
banner when playing the recording. The quality choice is only
valid for one particular programming session.
8.
VPS/PDC
Activate the VPS/PDC function using the
key to trigger recording at the actual time of
the beginning of the broadcast. If the channel broadcasts VPS/PDC signals you can avoid the
consequences of any delays in broadcasting.This adjustment is only valid for this programming
session and for channels received via the aerial (
PR - -
).
9.
Keep Timer
Memorise your programming by selecting Keep Timer with the
key and confirming with
the
OK
key.
• The Programming screen reappears.Your programming is now displayed in the chronological
list of programming already carried out. On this screen it is only possible to display 5
programming sets from the maximum 16. If you have carried out more than 5
programmings, to see the others press the
or
key.
Note: to check (or delete) programming parameters, select a
name and press
OK
. The programming parameters menu
appears. Correct the parameters as shown in steps 1 to 9 or
delete the programming by selecting
Cancel Timer
and
confirming with the
OK
key.
10.
Return to the main menu using the
MENU
key in order to continue to use your DTH 8000
or turn it off using the
STANDBY/ON
key, after having loaded a DVD+R or DVD+RW disc
with remaining time compatible with your programming.
Note: if you carried out the installation of a satellite receiver or a cable channel using the G-link cable (see
page 9 onwards), you can carry out deferred recording of satellite programmes. In this case it is not
necessary to program the satellite receiver.
DTH8000_en(EB-UB) 18/12/03 14:48 Page 24
