Connections and initial set up
7
EN
EN
Sorting the channels
9.
A channel sorting window will appear.The picture of the selected channel is shown in the
background.
The automatic channel search has assigned numbers to the channels is a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
Note: Channel sorting instructions:
Move: press
OK
(then the
and
keys until you reach the
desired position (Pr no. on the left of the list then
OK
: swapping
of the 2 channels).
Delete:
CLEAR
key.
Rename:
INFO
keys, then
and
to search for a name on
the list. Validate by pressing
OK
.
Decoder set-up:
AV
(key (displays a symbol in the list of channels).
10.
When all channels have been sorted to your liking, press the
key.
Your DMR has an automatic time (and date) setting function. In general, no setting is required on
your part.
11.
If the time and date information is correct, press twice on
OK
.The Main Menu of the DMR is
displayed: the installation of the channels is now complete.
Clock setting
AutoClock: If the date and time information is not correct, adjust the clock as described below,
then check in the Installation menu that the automatic time setting is activated.This menu is
reached from the Setup menu (see page 49). Setting the time and date on the DMR is important
for the proper operation when recording programmes and for optimum downloading of the
programmes guide NAVICLICK.
1.
Select Year. Enter 4 digits for the year
(2, 0, 0, 3 for 2003).
2.
Then enter the 4 digits of the date
(press 1
,
2
,
0
,
5 for 12th May).
3.
Enter the 4 digits of the time
(press 1
,
5
,
5
,
9 for 15:59 (03:59 PM).
4.
Then press twice on
OK.
The Main Menu will appear
again. Channel set-up is complete.
Note:You can now use your DMR and take advantage of its numerous functions. If you want to connect a
satellite receiver to your DMR refer to page 10 for the recommended connection.You can also complete your
installation through the settings available in the
Options
menu (refer to pages 48-49). These adjustments
depend on the other devices that you are likely to connect to your DMR.
If you want to redo the automatic channel set-up, you will have to select
Interactive setup
in the
Installation
menu (in the
Setup
menu).
DTH7500_en 4/07/03 16:55 Page 7
