EN
25
Unlock the video recorder with the
B
(
STANDBY
) key on the remote control.
(on the display of your
video recorder).
Over 10 seconds
ELECTRONIC KEY (CHILD LOCK)
LOCK 17:45
To prevent use of the video recorder, the keys on the front can be locked. Press the
B
(
STANDBY
) key on the
remote control for 10 seconds and keep it in a safe place.
CONTINUOUS PLAY/RECORD
Play
6 seconds
Record
6 seconds
You can permanently play or record a tape. At the end, the tape is rewound to the beginning and continues
playing or recording. This function, used with the LP function, provides for 8 hours of continuous recording or
playback with an E240 tape.
- The 8 memories are full. You need to free a memory in order to programme again.
- The VI code is not listed. Enter the channel number.
- If you programmed 2 or more recordings with overlapping start and stop times, the menu
TIMER REVIEW
appears along with an error message (the programmed recordings are flashing). Delete the programmed
recordings with the key
0000
.
ERROR MESSAGES RELATED TO PROGRAMMING
To avoid erasing one of your tapes by accidental over-recording, we recommend you protect them by breaking the
security tab. To reuse a protected tape, just stick a piece of adhesive tape on the opening.
Tapes are sensitive to utilisation and storage conditions. Keep them away from dust, humidity or excessive heat. Do
not place them next to appliances producing important magnetic or electrical fields (electro-magnet, motor…).
There are different types of tapes. These differences are not only due to the magnetic tapes but also to the mechanical
elements of the tape. A poor quality tape can damage your video recorder. You should therefore use quality tapes or
well known brands.
VHS
VHS
Protected
Unprotected
CONCERNING VIDEO TAPES
To control the video r
ecorder,
press the
VCR
key on your
remote control.
ENGLISH
ADDITIONAL INFORMATION
U-T7078PE-GB/MR-BEI/912 6/01/00 10:18 Page 25
