EN
19
IDENTITY TAGGING
With
W
, select the line
Identity tagging
.
Validate with
OK
.
This menu appears.
Key in a 4-digit code (example: 0796):
another menu comes up.
You may now key in your “tagging”. This
could be for example your name, telephone
number or post code, etc.
Use the number keys 1 or 2 to select a
character, then move the cursor with
C
or
B
.
To store in memory, press
OK
.
PERSONAL CODE NUMBER
Your VCR is fitted with a safety device
which enables you to prove that you are
the owner.
If you wish to check your identity
information, press and hold the
STOP
key on the front of the VCR for about 10
seconds.
The identity tag information will be
displayed on the screen. The display will
automatically reset after about 15
seconds.
MY VIDEO RECORDER
PERSONAL CODE
NUMBER IS:
Please keep in a safe place.
EXTERNAL TIMER
Recording of a programme can be started
by a satellite receiver (or another set). Tick
this box (
þ
) off (
OK
key) so that you have to
programme only one set: your satellite
receiver.
EXTERNAL TIMER
(recording
programmed via an external set
connected). The external set controls
your VTH6080 (example: satellite
receiver). This option concerns you
when you have adopted connection
type N° 3 of the chapter “Setting up
a satellite receiver” in the installation
manual. The set must support this
feature (control voltage applied to
pin 8 of the Scart socket). The set is to
be connected via a Scart cable to the
AV1 socket located at the rear of your
VTH6080.
9
11
9
LANGUAGE
To change the language of the OSD menus
(French, English, German, Italian, Spanish,
Polish, Czech, Dutch), use keys
C
and
B
.
11
10
To control the video r
ecorder,
press the
VCR
key on your
remote control.
In the case of error, or to quit,
press the key.
ENGLISH
U-T7078PE-GB/MR-BEI/912 6/01/00 10:18 Page 19
