2
G
Operating Instructions
Thank you for choosing a Thomson product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
•
DVB-T Indoor Antenna
•
Power supply unit
•
Hook
•
Stand
•
Power inserter
•
2 screws
•
2 wall anchors
•
These operating instructions
3. Safety Notes
•
The product is intended for private, non-commercial use only.
•
The product is intended for indoor use only.
•
Use the product for its intended purpose only.
•
Protect the product from dirt, moisture and overheating and use
it in dry rooms only.
•
Children should be supervised to ensure that they do not play
with the device.
•
Do not use the product in areas where the use of electronic
devices is not permitted.
•
Connect the product only to a socket that has been approved
for the device. The electrical socket must always be easily
accessible.
•
Disconnect the product from the network using the power
button – if this is not available, unplug the power cord from
the socket.
•
Lay all cables so that they do not pose a tripping hazard.
•
Do not bend or crush the cable.
•
Do not drop the product and do not expose it to any major
shocks.
•
Dispose of packaging material immediately according to locally
applicable regulations.
•
Do not modify the device in any way. Doing so voids the
warranty.
Warning
•
Do not use the product if the AC adapter, adapter cable or
power cable is damaged.
•
Do not attempt to service or repair the device yourself. Leave
any service work to
qualified experts.
•
Do not open the device or continue to operate it if it
becomes damaged.
4. Specifications
Frequency band(s)
UHF: 470 – 790 MHz
Active antenna gain
UHF: 6 – 12 dBi
Impedance
75 ohm
Connection
Coax plug
Ambient temperature
-20 to +40° C
Specifications in accordance with Regulation (EU)
2019/1782
Manufacturer’s name or trade
mark, commercial registration
number and address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identifier
S003ATV0600015
Input voltage
100-240 V
Input AC frequency
50/60 Hz
Output voltage/
Output current/
Output power
6.0 V DC/ 0.15 A/ 0.9 W
Average active efficiency
69.9 %
Efficiency at low load (10 %)
57.9 %
No-load power consumption
0.03 W
5. Startup and Operation
Note
Please note that the number and quality of stations received
may vary depending on the position of the antenna and local
conditions.
5.1 Powering the antenna with the power supply and the
bandpass filter (fig. 1)
•
Connect the power inserter to the antenna input of the set-top
box or digital TV.
•
Connect the coaxial cable from the antenna to the input power
inserter
