27
EN
F - USE
MOTORISED KIT WITH ARTICULATED ARMS
FOR SINGLE OR DOUBLE LEAF SHUTTERS
1 - USE wITH A CONTROL DEVICE
Use the supplied remote control, a wired control
switch, or other programmed transmitter to control
the system.
With a remote control or a radio control device
• Opening :
1- Press key on your remote control.
2- The shutter opens.
3- Unless you do otherwise, the shutter stops
when it’s open.
4- If it’s opening, press key to stop shutter.
• Closure :
1- Press key on your remote control.
2- The shutter stops.
3- Unless you do otherwise, the shutter stops
when it’s closed.
4- If it’s closing, press key to stop shutter.
With a wired 2 stage button
Change switch position to open the shutter when it’s
closed, and to close it when it’s open. When using
this type of control switch, the radio control does
not operate.
With a wired 2 stage button
Press either of the two buttons to open or close.
Using with type of control switch, there is no
incompatibility with the radio control.
With a 3 stage control device
The two end positions close or open, the central
position stops the shutter. If the switch is blocked
to side positions (3 stage button stable), the shutter
automatically stops moving, you don’t need to
bring it back to central position. However, if the
switch remains to end positions, the radio control
is blocked.
To use a radio control device when a wired
control switch is connected, the switch must
have 3 positions. Keep pressed to operate the
system (the button returns in central position
when it’s released) OR, the switch has 2
pushbuttons.
2 - USE wITH THOMBOX
• When you pair your gear motor with a Thombox,
this will appear in the widget «
Opening
modukles
». It will also appear as «
Actuator
»
in rules creator. You can also create rules to
manage opening and closure of your shutter.
• When you pair your remote control with a
Thombox, it will appear in the control panel, but
it’s also visible in rules creator of «
Controls
»
device. You can establish rules that will triggere
with your remote control buttons.
3 - DELETING ITEMS FROM REMOTE
CONTROL MEMORY
If you want to delete one remote controlled device,
repeat the programming phase described in this
guide with the channel concerned. If you programme
2 times a Thomson device on the same channel,
this will be cancelled from channel.
4 - DELETING ALL ITEMS FROM REMOTE
CONTROL CHANNEL
• If you want to delete all remote controlled
devices, press the on/off switch of the channel
concerned for 3 secondes.
• Release the buttons, and press again for 3
seconds the on/off keys.
Every channel-controlled device will be deleted.
