Thomas Hilfen für Behinderte GmbH & Co. Medico KG · Walkmühlenstr. 1 · D - 27432 Bremervörde · Germany
Phone: +49 (0) 47 61 / 88 60 · Fax: +49 (0) 47 61 / 8 86-19 · [email protected] · www.thomashilfen.de
Art.-Nr
. /
Item
code:
95643,
Stand
/ status:
09/2010,
tec
hnisc
he
Änderungen
vorbehalten
/ subject
to
tec
hnical
alter
ations
Repairing set hight-adjustment trio
Item code: 9700900000000
A set (fig. 1) consists of:
•
1 metal-lock-sleeve RIGHT with winding-pin M6x10
•
1 metal-lock-sleeve LEFT with winding-pin M6x10
Necessary tools:
•
1 grinding machine
•
1 Allen key, 3 mm
•
anti-corrosive metal protection
In case the bushes of the height-adjustment-screw at the vertical tube of the walker trio are
broken, please proceed as follows:
1. Please unscrew both screws of the height-adjustment and pull the top frame out of the
tubes!
2. Carefully detach the broken bushes (the welded seam) from the tube. This has to be done
always on both sides! (fig. 2)
3. Make sure that the hole in the tube is big enough for the bolt of the screw! (fig. 3)
4. Clean the bare metal parts carefully and cover them with an anti-corrosive protection!
5. Put the new metal-lock-sleeves on the vertical tube on each side! (fig. 4)
6. Fasten the metal-lock-sleeves by using the set screw with the 3 mm Allen key on both
sides! (fig. 4)
7. Put the top frame smooth into the tubes of the underframe!
8. Please check whether the screws of the height-adjustment have a bump on the backside!
If yes, you must grind it completely plane!
Attention: Otherwise the clamping of the top frame does not work! (fig. 5)
9. Put the screw of the height-adjustment into the metal-lock-sleeve (on both sides)!
10. Adapt the top-frame to the right height and fix it by tightening the screw of the height-
adjustment (on both sides).
