2021-04
Adjustment Options / Features
The settings / adjustments must always be made by trained / instructed professionals (such as medical product consult-
ants of specialist medical dealers).
Folding
Note: Be careful not to drop the rehab stroller onto the floor during folding to avoid bending and damaging the frame.
Make sure the plastic plug of the folding mechanism is in the correct position (higher end of the plug is pointing to the
rear of the rehab stroller). (Fig. 4)
Caution: The rehab stroller must not be folded up while the sun and rain cover is mounted.
Folding open
The rehab stroller is equipped with a folding safety device on both push bar joints. To fold it open, the folding safety de-
vice must be released on each side by means of one of the pushbuttons (Fig. 5). Then hold the buggy on the top and on
the side using the push bar and pull it upwards with a swinging movement (the locking slide audibly engages). Loosen
the clamping lever at the back and adjust the desired back angle (see the section on backrest adjustment). Adjust the
height-adjustable push bar to the desired position by pressing the side pushbuttons (Fig. 6).
Folding closed (smallest folded size)
Loosen the clamping lever at the back. Pull up the locking slides on the push bar (right and left). (Fig. 4) and hold onto
the safety bow mounted on the right-hand side. Using your upper body, push the push bar forward and fold the buggy
closed in a forward direction (Fig. 7). Press the backrest downwards and tighten the clamping lever again. Fold down
the push bar on the backrest.
The folding lock can be used to prevent accidental unfolding of the rehab stroller. For this purpose, release the button
on each side of the folding lock (Fig. 5), guide the strap around the front frame and push the button closed again. Now
therehab stroller can be securely gripped and transported using the tubes of the frame.
Parking brake function
To lock the brake, place your foot on the brake bow and push it down. Release the brake by placing your foot under the
brake bow and pulling it upwards. (Fig. 8)
Locking function for the front wheels
Tightening: Turn the front wheel so that it is straight and let the locking latch bolt snap in (it clicks audibly).
Releasing: Pull out the locking latch bolt and lock it with a 90° rotation. (Fig. 9)
Backrest adjustment
Loosen the clamping lever on the back, adjust the desired hip angle by sliding the back bow on the back rail, and re-
tighten the lever. (Fig. 10)
Seat depth
Loosen the two star grips beneath the seat and pull out the seat section towards you. The seat upholstery does not need
to be removed to adjust the seat depth. Once you have made the adjustment re-tighten the star grips. (Fig. 15)
Tip: To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your
other hand against the bottom centre of the backrest. (Fig. 12)
Instructions for Use – Swifty 2
26
Summary of Contents for SWIFTY
