Thomas PROTOUGH 900 Owner/Operator And Parts Manual Download

Page: 40 / 165

4. MAINTENANCE

4.4 50 HOUR SERVICE

4.4B Engine Fuel System

(continued)

Open the fuel line shut off at the fuel
tank (T90100).

Open the air bleed screw on the fuel
filter housing (T90033).

Close the bleed screw when fuel
begins to trickle out.

Open the air bleed screw on the engine
(T90033). The air bleed screw is locat-
ed at the front side of the engine.

Start the engine and operate for two to
three minutes before closing the air
bleed screw.

10. If the engine fails to continue to oper-

ate, repeat the air bleed procedures
steps 5 ~ 9.

Make sure there is adequate fuel in

the fuel tank. Gravity will help bleed

the air from the fuel system.

IMPORTANT

T90033

Fuel line shut off

Engine air bleed screw

T90100

Fuel line shut off

Summary of Contents for PROTOUGH 900






































































































































































Search results

Summary of Contents for PROTOUGH 900

Reviews:

Related manuals for PROTOUGH 900

Brands by name

Popular brands

Thomas PROTOUGH 900, Owner/Operator And Parts Manual

Search results

Summary of Contents for PROTOUGH 900

Reviews:

Related manuals for PROTOUGH 900

Brands by name

Popular brands