Seite 45 von 48
9. Technical data
TD 8000 FILL & GO M16
Capacity
8.000 cutlery pieces per hour
Consumption
1000 W
Weight
120 kg
Left side loading (w x h x d):
80 x 106 x 81 cm
Front loading (w x h x d):
81 x 106 x 78 cm
Noise level, not in operation
64 dB (A)
– 67 dB (A)
Noise level, in operation
67 dB (A)
– 72 dB (A)
Noise level, discharging
72 dB (A)
– 76 dB (A)
Input
1 Ph / N / PE (1 x 230 V AC 50 Hz)
Supply voltage
230 V AC 50/60 Hz
Control voltage
220 - 240 V AC
Nominal current
4 Ampere
10. Disposal of the machine
Most parts of the machine are steel, stainless steel or plastic. These parts can be
disposed in a normal matter.
Electronic parts such as the control board, axial fan, motor and so on belong to
electronic scrap.
The polishing bin is made of sheet metal and has a special certified FDA plastic
coating.
By separating and disposing wastes according to specifications we bear and maintain
our natural resources and guarantee re-use. The healthiness of man and nature will be
protected by doing so.
We will gladly dispose your machine for you. Just send the machine to the following
address:
Robert-Bosch-Straße 2
75050 Gemmingen
en
Summary of Contents for TD 8000 FILL & GO
Page 47: ...Seite 47 von 48 12 Notes en...
