Seite 35 von 48
en
5. Cleaning and maintenance
CAUTION!
Risk of serious injury or death by means of electrical shock
Before any maintenance or cleaning jobs are performed always assure the
rocker switch is switched to “O” and the power plug is removed from the power
circuit.
5.1 Daily cleaning
Clean the cutlery polishing machine daily by following these Steps:
1. Assure the on-off switch
is switched to “O” and the power plug is
removed from the power circuit.
2. Open the top cover to the machine and remove the granulate dust from
the polishing bin, cover sheet, frame and top cover with a damp cloth.
3. Remove the granulate dust from the UVC lamp with a dry cloth. The
UVC lamp is found underneath the front cover.
WARNING!
Damage may occur to the frame and / or the electronics
The in and outside of the machine should never be exposed to water.
Never hose down the machine or use a high pressure cleaner on it.
Never use cleaning powder, acid, leaching, steel wool or wire brushes to clean
the machine.
5.2 Replacing the granulate and cleaning the machine
When the orange LED starts blinking change the granulate for hygienically reasons
Replace the granulate prior to if:
it is heavily filled with food leftovers.
it soaked up too much water and is wet.
It is heavily greasy (Granulate is dark).
Summary of Contents for TD 8000 FILL & GO
Page 47: ...Seite 47 von 48 12 Notes en...
