Preparing the components
Insert the connecting bolts into the holes provided in the side panels (13 × connecting bolts each).
After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐
ated component are tightened.
ö
#
1
Right side panel
2
Left side panel
A
Connector bolt
Place the connector housings, the connecting bolts and the wooden dowels into the holes provided in the upper rear wall
(6 × connection bolts, 6 × connector housing, 4 × wooden dowel).
Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow posi‐
tion of the connector housings points towards the hole.
$
3
Upper rear wall
A
Connector bolt
B
Connector housing
C
Wooden dowel
Installation
Thon DJ Table 1500
7
