background image

5

8. 

9

Press this button once to re-start the currently playing track. Press this button repeatedly to 

select previous tracks for playback.

9.  +10

Use this button to access higher MP3 track numbers more quickly, as the unit 10 

tracks each time you press the button. This works only if there are more than 10 suitable files 

in the current folder.

10. 

:

Press this button to skip playback to the next track.

11.  CUE

If you press this button during playback, playback will be skipped to the beginning of the 

current track. The CUE button is lit then. If you keep the CUE button on the front panel 

pressed, playback will be resumed as long as you keep the button pressed (in CD mode only).

12. 

4;

Press this button after inserting the disc to start playback. The button is lit during playback. If 

you press this button during playback, playback will be paused and the button flashes. Then 

press the button again to resume playback.

13.  PITCH

Use this control to increase or decrease the playback pitch by ± 16%. This function is only 

available when the PITCH button is lit.

14.  CUE LEVEL

To adjust the level of the headphones output.

15.  MASTER LEVEL

To adjust the level of the LINE output.

16.  PITCH

If you press this button, the setting of the pitch control becomes available. When the pitch 

function is activated, this button is lit.

17.  PHONES

Connect your headphones with a 3,5mm jack to this socket. The output level is subject to the 

CUE LEVEL volume control.

18.  EJECT

Press this button to eject the inserted disc. 

Tip:

 The disc can only be ejected, if you have stopped playback before using the 

<

 button of 

the RC, or if you have paused it using the 

4;

 button on the front panel.

19.  Display

The display shows playback information and ID3 tags in MP3 mode. The progress bar in 

the upper left area gives you a clue about the estimated playing time (1 element = track‘s 

beginning, 10 elements = end of track).

20.  REMOTE SENSOR

The remote sensor receives the infrared signals from the RC. Don‘t place any objects in front of 

the sensor, don‘t put stickers here, otherwise the device will not react to the RC.

21.  Disc slot

Carefully insert half of the disc here. Then the CD drive takes over the transport. During the 

reading of the disc information the EJECT button is flashing. Afterwards the 

4;

 button is 

flashing to indicate the unit is in PAUSE mode.

Summary of Contents for Swissonic CDMP 1









Reviews: