3
Risk of explosion!
Do not throw batteries into a fire, do not recharge the batteries.
•
Never open batteries, never solder or weld batteries. The risk of explosions and injuries exists!
•
Regularly check the condition of the batteries. Leaking batteries can cause damage to the remote
•
control.
If you do not intend to use the remote control for an extended period, remove the batteries.
•
In the event of the batteries leaking acids, wear protective gloves and clean the battery
•
compartment and the battery contacts with a dry cloth.
Remote control (RC)
Open the battery compartment cover on the rear side of the RC handset and insert 2 x 1,5 batteries
(AAA size) according to the polarity layout engraved. Then close the compartment. Point the RC
towards the unit when operating these functions:
1.
<
- press once to stop playback, press
4;
to resume playback at the same location,
press twice to stop playback completely,
press
4;
to resume playback at the
beginning of the disc.
2.
- numeric buttons to call up tracks
directly
3. PROGRAM - to activate the program function
4. PITCH+
- to increase speed and pitch of playback
5. SGL/CTN
- to toggle between single track playback
and continuous playback of the disc
6.
:
- skips to the next track
7.
8
- fast forward in steps of 5 seconds
8.
9
- skips to the previous track
9. RELOOP
- skips playback to the beginning of
a loop
10. LOOP OUT - press once to set the end of a loop,
press twice to end loop playback
11. LOOP IN
- to set the beginning of a loop
12.
7
- fast backward in steps of 5 seconds
13. TIME
- toggles the display mode for playing time
14. CUE
- skips playback to the beginning of the
current track
15. PITCH—
- to reduce speed and pitch of playback
16. PITCH
- to activate or deactivate the pitch
function
17.
- to eject the disc from the slot
