thomann STAIRVILLE Show Bar Tri 18x3W RGB, User Manual

Page: 22 / 56

If the unit is in DMX mode and a DMX controller is connected and turned on, a dot on the
fourth digit of the display will flash. If the unit is in DMX mode, but without a turned on DMX
controller connected, the display will flash.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
LED floodlight
22