7
Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use. The display shows the
operating mode that was selected when the unit was last powered off.
7.2 Main menu
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Up]
and
[Down]
to
change the respectively displayed value. When the display shows the desired value, press
[MODE]
.
If you don't press any button for about 30 seconds, the current setting will be automatically
applied and the display turns off. The set values are retained as long as the device is connected
to the mains power supply.
Operating
LED floodlight
26
Summary of Contents for STAIRVILLE Show Bar Tri 18x3W RGB
