thomann stairville MH-Z1915 User Manual Download Page 29

Page: 29 / 84

Operating

7.1 Starting the device

CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright

light. This is also valid immediately after you turn on the device, when the device

operates in automatic mode or under remote control and when you turn off a

DMX controller that is connected to the device. Persons staying near the device

could be injured or frightened.
Before you turn on the device and during the operation, always ensure that

nobody stays close to the device. If work has to be performed in the area of move‐

ment or in the near vicinity of the device, it must remain turned off.

Connect the device to the power supply to start operation. After a few seconds, the fans start

to work, the head moves to the home positions for rotation (pan) and inclination (tilt). After a

few more seconds, the display shows

‘Run – Addr001’

. Now the device is then ready for use.

Operating

MH-z1915 Quad LED Wash Zoom

Summary of Contents for stairville MH-Z1915





















































































Search results

Summary of Contents for stairville MH-Z1915

Reviews:

Related manuals for stairville MH-Z1915

Brands by name

Popular brands

thomann stairville MH-Z1915, User Manual

Search results

Summary of Contents for stairville MH-Z1915

Reviews:

Related manuals for stairville MH-Z1915

Brands by name

Popular brands