thomann StairVille DJ Lase RGB Pro Advanced 1000, User Manual

Page: 71 / 80

Symptom Remedy
Device not working, no light, fan not working. 1. Check the power connection and main fuse.
2. Check the safety key switch.
3. Check the external safety switch (e.g. emergency stop).
No response to the DMX controller 1. If the display shows a flashing number, for example “001”, no DMX signal is
being received. Check the DMX connectors and cables to see if they are prop‐
erly linked.
2. If the display does not flash and there is no response, check the address set‐
tings and DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to the DMX interface circuit.
No response to the remote control 1. Check to see that the unit is in operation mode ‘Remote Control’. The display
has to show .
Troubleshooting
DJ Lase RGB Pro Advanced 1000
71