In this mode, the device projects a linked text (
‘t-01’
…
‘t-09’
) after a programmed countdown
time onto a surface.
Press
[MENU]
to open the main menu.
Press repeatedly
[MENU]
or
[UP]
and
[DOWN]
to open the
‘Cnt’
menu and confirm with
[ENTER]
.
Use
[UP]
and
[DOWN]
to set the desired time in a range from
‘0’
…
‘9999’
and confirm with
[ENTER]
. To return to the main menu without making changes, press
[MENU]
.
In this mode, the device exactly follows the operation of the master it is connected to.
Press
[MENU]
to open the main menu.
Press repeatedly
[MENU]
or
[UP]
and
[DOWN]
to open the
‘SLA’
menu and confirm with
[ENTER]
.
The display shows
‘SLAV’
, the unit is now in Slave mode. When the display flashes, no master is
connected.
To return to the main menu without making changes, or to change back to an active operating
mode, press
[MENU]
.
In this mode the device is controlled via a DMX controller.
COUNTDOWN mode
SLAVE mode
DMX mode
Operating
DJ Lase RGB Pro Advanced 1000
45
Summary of Contents for StairVille DJ Lase RGB Pro Advanced 1000
