thomann Stairville DJ Lase ColorStar 600, User Manual

Page: 32 / 56

Press "FUNC", until the display shows and starts flashing. In this menu the sensitivity and
thus the response characteristic of the microphone is set. Use the "UP" and "DOWN" buttons to
select the settings "S 0" (sensitivity = 0, sound control off) or "S 1" (low sensitivity) to "S 9" (high
sensitivity).
Press "FUNC", until the display shows and then press "ENTER". Now you can adjust the
number of the first DMX channel (DMX address) used by the unit. Select a value between 1 and
512 using the buttons "UP" and "DOWN". Press "ENTER" to store the value and to start opera‐
tion in DMX mode.
Make sure that this number corresponds with the configuration of your DMX controller. As the
device utilizes 17 DMX channels, the highest useable DMX start address is 494.
Press "FUNC", until the display shows . In this operation mode the unit follows exactly the
master device, that it is connected to. Press "ENTER" to confirm and to start operation in
"Master/Slave" mode.
Response characteristic
Operating mode "DMX"
Operating mode "Master/Slave"
Operation
showlaser
32