thomann Stairville DJ Lase ColorStar 600, User Manual

Page: 29 / 56

6 Operation
6.1 Putting into operation
Carry out the following steps, to take the unit into operation.
1.
Check to see whether all laser safety precautions have been taken. Make sure that
nobody is in range of the laser beam.
2.
Insert the safety key into the lock (17) and turn it into the "OFF" position.
3.
If not already done, connect the device to a mains power outlet (7).
4.
Turn the unit on using the main switch (8). After a few seconds the fan and the motors
start to work. The display shows the current operating mode. The unit is now opera‐
tional.
5.
Turn the safety key (17) into the "ON" position, to turn the laser beam on.
Operation
DJ Lase ColorStar 600
29