thomann JunoScan MK-II, User Manual

Page: 20 / 56

While the device and the DMX controller are in operation, a flashing white rectangle (DMX
indicator) in the display shows that a DMX signal is present at the input.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Setup
LED scanner
20