thomann Harley Benton AirBorne Pro, User Manual

Page: 27 / 48

6 Operating
1.
Press and hold the main switch of the transmitter and receiver to switch on the devices.
ð
If the ID displays show the same colour (red = channel 1, green = channel 2, blue =
channel 3, purple = channel 4) and the displays of the transmitter and receiver show
the same channel, the coupling was successful. The LEDs indicating the coupling of
transmitter and receiver turn off.
2.
If the coupling was not successful, the LEDs to indicate the coupling of transmitter and
receiver flash orange.
Hold down
[ID] on the transmitter and [CABLE TONE] on the receiver for five to seven sec‐
onds until the ID displays show the same colour (red = channel 1, green = channel 2,
blue = channel 3, purple = channel 4) and the displays of the transmitter and receiver
show the same channel. The LEDs indicating the coupling of transmitter and receiver
turn off.
3.
To select a different channel when pairing is successful, press [ID] on the transmitter.
ð
The channel assignment is automatically adopted for transmitter and receiver.
Pairing transmitter and receiver
Operating
AirBorne Pro Instrument
27