4
or
3
WORKBENCH
WORKBENCH
THMMANDIBULA
13
MANDIBULA SEATPOST
INSTRUCTION BOOK
(Figure 3)
Turn the screw (8) contraclockwise with a T20 Torx Fig. 3 until
between the D6 clamping bolt (6) and the washer appears a gap of
5 mm.
Now flip the seatpost around so that the head is facing to the ground.
Insert the upper half shell (medium (3) or deep slotted (4) half shell
depends on the rail type of your saddle) and hold the seatpost
vertical with one of your hands in place.
(Figure 4)
Use your second hand to fix the saddle on a surface (Workbench)
and insert one of the rails into the slot of the half shell. The second
rail is inserted by moving the seatpost into vertical position and
moving parallel the upper (slotted, 3 or 4) half shell axial. (it is often
helpful to start at the rear end of the saddle rails.).
(Figure 5) Mandibula rear view
Rotating the Mandibula to vertical
position
Axial movement of the slotted half shell
(3 or 4) between the saddle rails
(Figure 6) Mandibula rear view
2
1
1
2
4
or
3
4
or
3
4
8
5 mm
