THMMANDIBULA
21
MANDIBULA SEATPOST
INSTRUCTION BOOK
MAINTENANCE
IMPORTANT MAINTENANCE INFORMATION
WARNING
If not properly performed, assembly and maintenance work could
cause accidents resulting in death or serious injury.
•
Do not overestimate your technical ability. All assembly and
maintenance work should be performed by a specialist workshop
for bicycles. This is the only way to ensure the work is conducted in
a professional manner. bicycles. This is the only way to ensure the
work is conducted in a professional manner.
Improperly performed assembly and maintenance work could also
result in a loss of your warranty rights (liability for defects)! Risk of
accident caused by damaged components.
WARNING
•
Never attempt to disassemble your THM-Mandibula seatpost - only
THM employees are authorised to do this.
•
Always read and observe all of the assembly and maintenance
instructions in this manual, as well as those provided in the manuals
of other manufacturers whose products are used on your bicycle
(frame, saddle, seat clamp, etc.).
•
Always observe the minimum and maximum values specified – see
Technical specifications, from page 8 to 11.
•
When conducting assembly steps that require a specific tightening
torque, always use an appropriate torque wrench that is designed
for the tightening torque specified.
•
Only ever use original THM components which are available from
your specialist dealer or directly from THM.
Always ensure your bicycle is maintained in a flawless condition. Care
and maintenance will prolong the service life of your bicycle and its
components and also improve your personal safety!
If you suspect that your bicycle is defective or is not functioning properly,
stop using it and contact a specialist bicycle workshop immediately!
NOTICE
Never use a high-pressure cleaner or steam cleaner to clean your
bicycle, as the seals of your bicycle components are not able to
withstand the pressure. If such cleaners are used, it would result in
corrosion and material damage.
Never use caustic solvents (such as paint thinners, acetone, nitro
compounds, etc.) as they can attack the surface of your THM
components.
Only use commercially available paint care products and water to
clean your THM components.
Spirit or petrol should be used carefully - when using such products
avoid excessive wiping and prolonged exposure times.
