THK ET20 Series, Manual

Page: 8 / 28

Lineup
ET20+TSC ET35+TSC
30
1
+
44
1
+
Users can select a reduction ratio.
1
This dimension represents the distance from the bottom surface of the base to the top surface of the table.
ET (with Stepper Driver Controller TSC)
Combination with dedicated driver controller
Model Number Coding
The available motor options
vary based on the model.
ET20: 20P
ET35: 35P D00 and R00 use
mechanical homing.
Model Reduction ratio Stroke Control device Options Motor size Home position Cable length
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
ET20 — 45 — 330 — TS — / 20P — D00 — S3
ET20 20
: 1/20
330
: 330°
TS : Stepper Driver
Controller TSC
No symbol
: None
20P
: Stepper motor 20×20
No symbol : Multi-rotation
specifications
No symbol
: None
ET35 30 : 1/30
360
: Multi-rotation
specifications
2
U : Sensor 35P : Stepper motor 35×35 S3 : Standard 3 m
45 : 1/45 D00 : Counter-clockwise movement S5 : Standard 5 m
R00
: Clockwise movement
SA
: Standard 10 m
System Configuration
The customer must supply the wiring.
PC set-up software
D-step
Actuator cable (included)
CBL-TSC-AC-**-B PC communication cable (sold separately)
CBL–COM–03
CN1
CN2
CN3
CN4
The system configuration is as follows when “360: Multirotation specifications” is selected.
Magnetic proximity switch: AH003 (ASA ELECTRONICS INDUSTRY CO., LTD.)
・
Cable ends: multi-conductor cable
・
Cable length: Longer than 1 m
(length of covered portion of the cable
from the switch end)
Note) When using a 10 m actuator cable, please insert a noise filter in the TSC power source.
We recommend the RSAN-2003 noise filter from the TDK-Lambda Corporation.
Cable List
Cable Quantity Notes
Actuator cable for TSC 1 Comes with compatible actuator
I/O cable 1 Sold separately (I/O connector for TSC side only comes with TSC)
PC communication cable 1 Sold separately
2
There are conditions for using the
product under TSC specifications
in continuous rotation in one
direction. Please contact THK for
more information.
Controller must be procured
separately.
→ p. 20
7