7. Maintenance
7-6
CSKR
7-7
Method for supplying grease
Fig. 7 shows a representative cleaning sealing sheet method for your reference.
¡
Greasing procedure for CSKR20 and 26
1. Remove the top cover. (See 8. Appendix.)
Grease nipple
Grease gun
2. Supply grease using a grease gun as indicated in the figure above. (Move the slider part by
hand to permeate the grease throughout.)
3. Travel the block back and forth throughout.
4. If grease adheres to the sealing sheet, wipe it off completely using a clean waste cloth soaked
with ethanol.
5. Reattach the cover you have removed.(See 8. Appendix.)
¡
Greasing procedure for CSKR33 and 46
1. Remove the end cover. (See 8. Appendix.)
Grease nipple
Enlarged image of
the grease inlet
2. Supply grease using a grease gun as indicated in the figure below. (Move the slider part by
hand to permeate the grease throughout.)
Grease gun
3. The rest of the greasing procedures is the same as CSKR20 and 26.
Fig. 7 Method for supplying grease
7. Maintenance
www.thk.ru
тел. +7(499) 703-39-86
