2. Using a 7mm socket spanner unscrew and clean or replace the cooktop burner's
injector.
3. Replace burner head, cap and pan support. Ensure that the burner head and cap are
in the correct position.
Access to the under hob area
Pull cooker forwards to gain access to the rear of the cooker
1. Remove upstand
2. Remove pan supports, burner caps and burner heads
3. Using a torx T20 head driver remove the screws securing the burners to the hob. 2
per boiling burner and 4 for the wok burner.
4. Remove the lower 2 screws of each upstand bracket
5. lift hob at rear and slide out of position.
Summary of Contents for VEF90EG
Page 23: ...Wiring diagrams model VEF90EG ...
