Ignition
1. To operate the individual cooktop burners depress the appropriate control knob and
turn anti-clockwise to the spark symbol. Push to activate the electronic ignition.
2. Once flame is established turn the knob to the desired setting.
3. If the flame goes out repeat the procedure.
NOTE: if the burner does not ignite within 5 seconds, wait 5 minutes before reigniting.
Cooktop burner adiustments
The control knob is used
to adjust the flame of the gas burner.
'High flame' graphic =
highest output
'low flame' graphic = lowest output
Use 'High flame' setting to bring the pan to the boil, then adjust the flame to maintain the
required pan temperature. Burner flames should be clear blue, with no yellow tipping. If the
burners show any abnormality check that the burner
heads
are correctly located. lf
satisfactory performance cannot be abtained after consulting the trouble shooting guide,
contact the authorised service provider.
Please state the cooker model
number to the
service agent. The model number is stated on the data plate. The data plate is located on
the inside of the oven door, centre bottom. A copy of the data plate is also repro
duced on
the last page of
this booklet
Ventilation
The use of gas burners leads to the production of heat and moisture in the kitchen. For this
reason make sure that the room is properly ventilated. Keep ventilatin openings, such as
windows, open or provide a mecnanical ventilation device (e.g. a range hood of overhead
exhaust fan)
Minute minder ((if applicable)
The minute minder control knob is positioned on the left hand side of the control panel. To
activate the timer, rotate the knob clock-wise through 360°, then return the knob anti-
clockwise to required cooking time
Summary of Contents for VEF90EG
Page 23: ...Wiring diagrams model VEF90EG ...
