Use a window cleaner to clean the exterior glass panel.
Replacing
the oven
light bulb
Type: E 14, 25W, heat resistant to 300°C.
You may obtain this bulb from our service department
1. Disconnect the appliance from the main electricity supply.
2. To prevent damage place a teacloth in the bottom of the oven.
3. Unscrew the glass cover of the light.
4. Unscrew the old lightbulb and replace it with a new one.
5. Replace cover
6. Reconnect the power supply.
Service information
Service and maintenance must only be carried out by an authorised person
This appliance shall not be modified.
Always disconnect the gas supply and power before servicing the cooker.
After service always check connections for gas soundness at connections with
soapy water. NEVER use a naked flame to check for leaks.
To remove the upstand (for cookers fitted with upstand)
1. Pull cooker forward
2. To remove the upstand retaining brackets undo the 2 top and 2 rear retaining
screws securing each bracket.
2. Lift the upstand from the cooker hob.
To clean or replace a cooktop burner injector
1. Remove pan support, burner cap and burner head.
Summary of Contents for VEF90EG
Page 23: ...Wiring diagrams model VEF90EG ...
