Installing your cooker hood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE IT
IN EXTRACTION MODE OR RECIRCULATION MODE.
PLEASE TURN TO PAGE 20 NOW TO UNDERSTAND THE
DIFFERENCES BETWEEN THESE TWO MODES.
o
We recommend that two people install this hood.
o
Your cooker hood should only be fitted into the underside of a
kitchen unit.
o
It must be positioned at least 700 mm above the hob underneath it.
You cannot fit this product by securing it between two cupboards.
o
WARNING: DO NOT penetrate any screws into the range hood as
this may result in electrical hazards.
o
Warning: Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED
TO YOUR MAINS SUPPLY AFTER THE REST OF THE
INSTALLATION PROCESS HAS BEEN COMPLETED, AND THE
POWER POINT SHOULD STILL BE ACCESSIBLE FOR SERVICE.
1) Remove the metal grease filter (A).
2) Create an opening in the underneath of the kitchen unit; the cut-
out must be of the dimensions shown in the drawing below.
o
IMPORTANT: If you are going to connect your cooker hood to
external ducting, then you must complete the steps listed in the
“Connecting to external ducting” section before carrying on with
the rest of the installation (this information can be found on
page 19).
16
