11
:
The cooker hood must not
be fitted above stoves with a
radiant top plate.
:
We recommend that at least
two people install this hood.
:
Do not tile, grout or silicone
this hood to the wall.
NOTE – YOUR COOKER HOOD COMES WITH THE FOLLOWING FIXING
ACCESSORIES:
- 1 SPACER - 4 SCREWS -RAWLPLUGS
There are two ways of installation of cooker hood:on the wall and
under a wall unit
Way one:Mounting on the wall:
1 The cooker hoods should be placed at a distance of 65-75cm from
the cooking surface for best effect.
2 To install onto the wall drill 4 holes of Ø8mm on a suitable place
according with the centre distance of hole in the back of the
cooker hood.
3 Insert the nut into the holes.
4 Insert the screws into the nuts and tight.
5 Put up the cooker hood onto the fixed screws.
A).
65 c m
75 c m
496
9
0
Way two:Mounting under a wall unit
1. Drill 6 holes of 4mm diameter at the bottom of the hanging
cupboard
2. Put the one way valve on the cooker hood, then install the cooker
hood on the bottom of the cupboard, tighten the hood with
enclosed 6 screws.
INSTALLATION INSTRUCTIONS
– installing your Cooker Hood
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
COOKER HOOD THAT YOU CAN ADAPT
IT AS AN EXTRACTION FAN. IF THIS
IS THE CASE, YOU’LL NEED TO ATTACH
A SPIGOT (‘A’ in figure at bottom of
page) AND DUCTING. YOU’LL ALSO
NEED TO HAVE PREPARED YOUR WALL
EXHAUST SYSTEM PROPERLY
