Visit us at
www.thingslog.com
; (+359) 875 32 80 70;
8
User guide
8.1
Associating logger to a profile
1.
In order to perform the intial configuration you should have an account for ThingsLog IoT platform. If
you don’t have an account please go to https://iot.thingslog.com/signup and register to the
platform.
2.
Once registered go to Downloads section or directly visit https://iot.thingslog.com/thingslog.apk in
order to get thingslog Andriod Application.
3.
Login into the andorid app with your username and passowrd.
4.
Scann the QR code on the logger label.
Figure 7 Area to be scanned
5.
If the scan is sucessfull the android app will be able to register your logger to your profile. Note that
you can register once logger to only once. If you want to register the device to another profile please
contact us at [email protected].
6.
Once the device is registered you can continue with the initial configuration.
8.2
Network coverage and service
In order to work ThingsLog data loggers need network connection. Prior performing the initial
configuration ensure that there is GSM network coverage in your area. If you are not sure which network
operator has been used with your ThingsLog device please contact us at
