ThingsLog LPMDL-1101 User Manual Download Page 3

   

   

Visit   us   at   

www.thingslog.com

;   (+359)   875   32   80   70;   

[email protected]

   

   

 

Average   battery   life:   

5   years

   

 

Build-­‐in   antenna   

 

Reconfigurability   over   the   air:   

ability   to   reconfigure   the   logger   reading   and   transmission   rates   over   

the   air

   

 

Secured configuration

   

 

Replacable micro sim card

   

 

Certified   for   both   industrial   and   home   usage   

4

 

Safe   and   Healthy   instructions   

   

Important   
information   

Please    read    the    complete    information,    the    specifications,    the    installation   
instruction    and    the    electrical    interconnect    schema    prior    to    working    with    this   
product.   

For    your    own    health    and    safety    and    for    the    equipment    to    function    corectly      
please   ensure   that   you   understand   completely   the   contents   of   this   guide,   prior   
instrallation,   configuration,   operations   or   profilactics.   

CE   

From   license   point   of   view,   nonauthorized   modifications   or   additions   are   not   
authorized.   

Terms   of   use   

The   data   logger   is   intended   for   use   in   the   following   environmental   conditions:   

 

for   use   indoors   or   outdoors   without   prolonged   exposure   to   direct   UV   
radiation   

 

for   altitudes   up   to   2000   m   

 

for   ambient   temperatures   from   -­‐40   °   C   to   +   60   °   C,   with   continuous   
exposure   to   temperatures   of   -­‐20   to   -­‐40   °   C   not   recommended   

 

for   relative   humidity   of   4%   to   100%   

 

for   supply   voltage   deviation   of   up   to   +   20%   and   -­‐15%   of   declared   voltage   

 

for   use   under   the   overvoltage   category   I;   

 

for   environment   with   pollution   degree   3   (PD3).   

Health   and   safety   
rules   for   installation   

   

All   installation   work   must   be   performed   in   accordance   with   the   local   regulations   
on   health   and   safety   at   work   in   electrical   systems   as   well   as   the   regulations   
governing   the   electrical   system   and   networks.   
Only   engineers   or   technicians   with   product   expertise   that   has   previously   read   
and   understood   this   guide   should   install   this   product.   
   

Summary of Contents for LPMDL-1101

















Reviews: