Installation / Owner’s Manual 12
3. Change the position of the door handles (See Art01727):
- Remove the screws [41] and door handle [70] from each door.
- Reverse each door handle and put the lower door handle on the upper door and the
upper door handle on the lower door.
- Attach each door handle with the screws.
4. Reinstall the doors (See Art02273):
Turn the doors180° from their original position.
- Turn each of the lower hinge pins [64] into the lower cabinet hinges.
To prevent damage to the threads of the hinge pins, turn the hinge pins by
hand until tight and then tighten with a screwdriver.
Apply Loctite removable thread locker (blue) to the threads of
the hinge screws before assembly to prevent loosening during
use. Do not allow Loctite to contact any of the plastic surfaces
of the refrigerator because it can damage those surfaces.
-
Put the washer onto the lower hinge pin of the lower door only
- Put the LH lower hinge support [256] onto the lower hinge of the lower door only.
- Put each door down onto the lower hinge pin.
- Align the holes in the upper hinges and hold in this position.
- Turn the upper hinge pin into the hinges of each door.
- Tighten the hinge pins.
- Put the storage bins in the doors.
NOTICE
CAUTION
!
63
66
254
64
67
256
Art02273
NOTICE
41
70
Art01727
Summary of Contents for N614E.3F
Page 16: ...Installation Owner s Manual 16...
