Operation
GBTT3LBA_V(3).DOC
Page - 15
4 Operation
4.1 Control panel
Fig. 4-1 - Control panel
1 POWER LED
2 PRINT LED
3 CONDITION LED
4 ERROR LED
5 PAUSE button
6 FEED button
7 STOP button
8 MODE / REPEAT button
The control panel on the front of the printer has four control buttons (Pause, Feed, Stop and Mode/Repeat) and
four LED control lamps (Power, Print, Condition and Error).
4.2 Normal operating mode
After switching on, the printer is in normal operating mode. The control buttons function as follows:
Pause button:
Printing is temporarily interrupted. The Print LED goes off.
Press this button during printing to stop printing after the current label. Press the button again to continue
printing.
Feed button:
Feed to the start of the next label.
Stop button:
Use this button to stop and cancel the current print job. Press the Stop button during printing to stop printing
immediately. Press the Stop button again to cancel the print job.
Mode/Repeat button:
If you press this button while the printer is in the Print status (the Print LED is on), then the last label is printed
again.
1
2
3
4
5
6
7
8
