manualshive.com logo in svg

Thermos Thermos C-21G0 461611513, Product Manual, Page: 23 / 32

Share
Download
Thermos Thermos C-21G0 461611513 Product Manual Download Page 23

11

12

Lower Hinges

    Attach lower hinges to back of firebox using

 #10-24x1/2’’ machine screws

, 

5x15 fiber washers

 and 

#10-24 flange nuts

. 

    The center flat portion of the hinge should be at the bottom (see inset).

Center flat portion 

of hinge on bottom

Lid Handle and Upper Hinges

    Remove the insulation washers, fiber washers and wing nuts attached on handle.  Attach handle to lid with the insulation 

washers, fiber washers and wing nuts removed from handle as shown (A).

    Attach upper hinges to back of lid using 

#10-24x1/2’’ machine screws

, 

5x15 fiber washers

 and 

#10-24 flange nuts

.  

    Hinge should curve downward when properly installed (B).

5x15 

Fiber Washer

Qty. 8

#10-24x1/2”

Machine Screw

Qty. 4

#10-24

 Flange Nut

Qty. 4

#10-24 Flange Nut

Qty. 4

5x15

 Fiber Washer

Qty. 8

#10-24x1/2”

Machine Screw

Qty. 4

23

#10-24x1/2”

Machine Screw

5x15 

Fiber Washer

#10-24

 Flange Nut

A

B

#10-24 

Flange Nut

#10-24X1/2”

Machine Screw

5x15 

Fiber Washer

Insulation washer, 
fiber washer and 
wing nut removed 
from handle

Summary of Contents for Thermos C-21G0 461611513

































Reviews:

No comments