39
You can program your Comfort
and
temperature times either by using one of the three
prestored programs, or by connecting the pilot wire to a programming control (
Pilot wire (FP) mode
is the default setting - refer to your programming control’s manual
)
You can connect several appliances to one programmer.
3 programs have been prestored:
,
and
and they cannot be changed.
is recommended for when you are constantly at home, at the weekend for example (Eco mode
from 23h to 5h, Comfort mode from 5h to 23h).
is recommended if you are absent during the day (Eco mode from 23h to 5h and from 9h to
17h, Comfort mode from 5h to 9h and from 17h to 23h).
is recommended if you are absent during the day, but you come back home at lunchtime (Eco
mode from 23h to 5h, from 9h to 12h and from 14h to 17h, Comfort mode from 5h to 9h, from
12h to 14h and from 17h to 23h).
means that a programming control is used.
PROGRAMMING THE HEATING PERIOD:
HOW TO USE PROG MODE
PROG
0h
1h
2h
3h
4h
5h
6h
7h
8h
9h
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
20h
21h
22h
23h
NB :
If no command is received on the pilot wire, the device will function in Comfort mode.
When switching from Comfort to Eco mode, the new mode is active after about 12 seconds.
The Frost Protection and Load shedding commands have priority over the Eco, Comfort and pro-
gramming (P1, P2, P3 and
) modes.
GB