Thermoptek FireAngel ST-625 User Manual Download Page 11

11

.

.

.

.

.

The alarm sound will soon stop.

.

During the reduced sensitivity mode the 
red LED on your alarm will continue to flash 
more rapidly than normal, approximately 
once every 10 seconds. 

Your alarm will automatically return to full 
sensitivity on completion of the reset cycle 
and the red LED will revert to flashing once 
every 40 seconds.

DANGER:

 Never ignore any alarm. 

Ignoring the alarm may result in injury 
or death. If your smoke alarm activates 
and you are not absolutely certain of the 
source of the smoke, get everyone out of 
the house immediately.

SLEEP EASY™ 

Low battery warnings often start at night or 
when it may be inconvenient to replace the 
batteries. You can silence the audible chirp 
for a period of 8 hours by pressing the 
test button.  Your FireAngel

® 

smoke alarm 

will still detect smoke during this time of 
low battery warning silence.  However it 
is recommended that you replace your 
batteries immediately, and certainly within 
7 days, as your FireAngel

® 

 alarm may then 

have insufficient power to warn you of a 
real fire situation after this time.

WARNING: 

 Your  FireAngel

® 

 smoke alarm 

cannot be silenced if the chirp is indicating 
a fault.  In this instance, the unit should be 
replaced immediately to ensure protection 
in the event of a fire.

Summary of Contents for FireAngel ST-625

















Reviews: