10
The unit will give an audible alarm
consisting of 2 cycles of 3 loud beeps, then
stop automatically.
The red LED on your alarm will flash
rapidly during the audible signal.
NOTE:
The test button accurately tests
the alarm’s smoke sensing circuit, there is
no need to test your alarm with smoke. If
your smoke alarm fails to give an audible
test signal, please refer immediately to the
‘Troubleshooting’ section (see page 13).
WARNING:
You should test your smoke
alarm every week.
ALARM SMART
SILENCE™
DANGER:
If your FireAngel
®
smoke alarm
emits the full alarm signal and you are
not testing the unit, the smoke alarm is
warning you of a potentially dangerous
situation that requires your immediate
attention. Only use the alarm silence
function after making sure that there is no
fire. Do not block the vents on the alarm
or disable the smoke alarm in any way, as
this will remove your protection. Smoke
alarms can sometimes react to cooking
fumes or other non-emergency situations.
Your smoke alarm features “Smart
Silence™” technology. In the event of a
known false alarm your smoke alarm can
be temporarily silenced by briefly pressing
the central test button. Your alarm will
automatically return to full sensitivity
within 10 minutes.
NOTE:
If the level of smoke reaching the
alarm is very high the alarm silence will be
overridden and the alarm will continue to
sound.
Briefly press and release the test button.
The alarm sound will soon stop.
Your alarm will silence and enter
into a reduced sensitivity mode for
approximately 10 minutes.
.
.
Summary of Contents for FireAngel ST-625
Page 1: ...User Manual Smoke Alarm Model ST 625...
Page 16: ......
