Thermopatch NL-15 R/SQR MAMMOTH, User Manual

Page: 38 / 39

thermopatch.com
38
12. End of lifecycle
Choose to dispose of the machine responsibly when it has reached its end of life.
Electrical machinery, accessories and packaging should be recycled as much as possible in
an environmentally responsible manner.
- Dismantle the machine groups: steel parts / pneumatic components / electrical compo-
nents
- These can be separated and returned for recycling.

ATTENTION!
Always dispose according to current and locally applied guidelines for health and safety and
disposal requirements.
13. Disclaimer
The information contained in these documents is confidential, privileged and only for the in -
formation of the intended recipient and may not be used, published or redistributed without
the prior written consent of Thermopatch B.V.
The opinions expressed are in good faith and whilst every care has been taken in preparing
these documents, Thermopatch B.V. makes no representations and gives no warranties of
whatever nature in respect to these documents, including but not limited to the accuracy or
completeness of any information, facts and/or opinions contained therein.
Thermopatch B.V., its subsidiaries, the directors, employees and agents cannot be held li-
able for the use and reliance of the opinions and findings in this document.
For any warranty Thermopatch B.V. refers to its general terms and conditions.
We can confirm that the machines we supply conform to CE when in standard configuration.
Using sealing pads of any format other than the standard supplied with the machine may
render the CE declaration invalid.
Thermopatch accepts no responsibility for any damage or injury that may result from pos-
sible non-conformity.
Choosing an alternative configuration other than the standard is at the customer’s own re -
sponsibility.