Thermona THERM ELN 15 Installation, Operation And Maintenance Manual Download Page 18

 

18 

11.

 

Warranty and reliability for defects 

The manufacturer shall not be liable for any mechanical damage to the individual components caused as a 

result of thoughtless treatment, for damage caused by unprofessional intervention into the electronic system 

during the adjustment and connection of the add-in regulations, for damage caused by the use of parts and 

components other than the original components used by the manufacturer. The warranty shall also not be 

applicable to defects caused by non-compliance with the binding warnings and terms stated in individual parts 

of this Operation and Maintenance Manual. Furthermore, the warranty shall not apply to non-standard 

conditions in the distribution systems (el. voltage fluctuations – especially overvoltage peaks, etc.), defects of 

equipment other than the boiler which affect its operation, damage caused by external factors, mechanical 

damage, storage, transport and defects caused as a result of a natural disaster, etc. In such cases, the service 

company may seek reimbursement of the repair costs by the customer.  

THERMONA spol. s r. o. provides a warranty on its products in accordance with the terms and conditions 

specified in the warranty card delivered with the product. 

 

Conditions for warranty claims: 

1.

 

Regular inspection of the boiler once a year. Inspections shall only be carried out by an authorized 

organization, i.e. authorized service company (such inspections are not included in the price of the boiler!). 

2.

 

All the records of warranty repairs and annual inspections of the boilers are to be documented in the 

appendix to this manual.

 

 

12.

 

Interconnection with the solar system 

THERM ELN electric boilers can also be used as an alternative (additional) heat source in addition to solar 

systems. The primary source for DHW tank heating is the solar system. When the sunlight, and thus energy 

supplied to the tank, is low, the THERM ELN electric boiler is activated and provides additional heating to the 

storage tank. This will ensure sufficient supply of hot water e.g. on cloudy days or during increased 

consumption. Make use of solar sets with Thermona electric boilers at favourable prices (for details, please visit 

www.thermona.cz). 

 

The principle for connecting additional heating by means of the THERM ELN electric boiler. 

  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for THERM ELN 15
























Reviews: