3
6.
Cut off end of cable.
INSTALLATION PROCEDURES
7.
Terminate cable with appropriate PETK or SCTK
termination kit. Refer to kit installation instruc-
tions.
PETK Kit for Power/End Terminations
SCTK Kit for Splice Connections
8.
Push excess cable back through expediter. Tape
cable expansion loop to pipe.
9.
For splice connections: Connect bus wires using
small wire nuts (for BSX, HTSX, KSX and TSX) or
medium wire nuts (for RSX, VSX, HPT and FP).
Connect braid wires using large wire nut. See
wiring details for splice connections.
10.
Tighten cap securely.
11.
Completed splice/end kit. Make sure latch mecha-
nism is in the locked position.
12.
To remove cap, lift latch mechanism and unscrew
cap.
In-Line Splice.
Wiring Details for Splice Connections
100 mm
(4")
