2
1a.
For one or two cables. Locate bus connection
(HPT and FP only) and cable as shown. Cut end
of cable at angle to aid in piercing grommet. Leave
additional cable for expansion loop.
1b.
Two cables.
Terminator
TM
DS/DE
3.
Slide expediter toward pipe and route cable
through support base entry.
4.
Insert banding guide into expediter and snap into
place.
5.
Mount expediter to pipe using pipe band. Do not
band over cable.
2b.
Two cables.
2a.
For one or two cables. Insert cable into expediter.
If mounted on bottom of pipe, punch out weep
hole.
300 mm
(12")
300 mm
(12")
