ThermoFLUX INTERIO, User And Maintenance Manual, Page: 8 / 51

7
1.5 Basic principles and operation
The Interio pellet stove is a special heater intended exclusively for domestic use and
intended only for burning wood pellets of 6 mm diameter and 30 mm length. During
operation, the integrated heat exchanger produces hot water which is delivered to a
central heating system. The integrated pump only switches on when the preset water
temperature in the system (50°C) is reached. For normal operation, it is only necessary
to start the stove and select the desired power value or temperature. By installing the
room thermostat, it is possible to automatically ignite and control the stove. The pellets
automatically fall into the burn pot and then are ignited with an electric heating
cartridge. Depending on the set value of the power, the pellet conveyor automatically
adds the required amount of pellets. The required air supply for combustion into the
combustion chamber is controlled. The resulting heat energy in the combustion
chamber is supplied to the central heating. At the end of the combustion chamber
there is an exhaust fan, which releases the flue gases created in the chimney. Every
day it is recommended to clean the ashes. Every 1-2 months or after consumption of
approx. 500kg Enplus (A1) pellets a cleaning of the flue gas chamber and the pipe
heat exchanger is required. The devices are designed and tested so that they can be
installed in homes and have the necessary approvals. For the combustion air is needed.
For this reason, the combined use of kitchen exhaust systems, and the ventilation in
the same room with a stove is not allowed.