— 8 —
UNPACKING
All Thermodyne cabinets are factory tested for
performance and certified free from defects.
Thermodyne Damaged Goods Policy
There are two types of damaged merchandise:
A. Visible Damage and B. Concealed Damage.
A. Visible Damage: The product being received
is visibly damaged.
1. The receiver should refuse the damaged
merchandise.
2. Receiver should sign the bill of lading
indicating which merchandise is being
refused due to damage.
3. Contact Thermodyne Customer Service
Representatives immediately.
B. Concealed Damage: Damaged merchandise
cannot be externally detected.
Your receiving operation should inspect for this
type of damage. Please inspect your delivery
carefully.
If the product is damaged:
1. Save all packing material.
2. Contact Thermodyne Customer Service
Representatives immediately.
3. Receiver must call the carrier to schedule
an inspection of the damaged merchandise
within 5 business days.
INSTALLATION CODES
AND STANDARDS
These installation instructions are for the use of
qualified installation and service personnel
only.
1. Installation or service by other than qualified
personnel may result in damage to the
Thermodyne cabinet and/or injury to the operator.
2. National Electrical Code (ANSI/NFPA No. 70,
latest edition) available from the National Fire
Protection Association, Batterymarch Park,
Quincy, MA 02269.
In Canada, the cabinet must be installed in
accordance with:
1. Local codes.
2. Canadian Electrical Code (CSA C22.2 No.
3, latest edition) available from the Canadian
Standards Association, 5060 Spectrum Way,
Mississauga, Ontario, Canada L4W 5N6.
Figure 5: Outline Dimensional Drawing, 744HW-CT Countertop with 6 Inch Deep Wells
OFF
60
100
250
150
200
OFF
60
100
250
150
200
OFF
60
100
250
150
200
OFF
60
100
250
150
200
DEEP HOUSING LID SHELF OPTION SHOWN
DEEP BASE SHELF
OPTION SHOWN
WELLS FOR 6" PANS
33"
Exterior Depth
60 1/8"
Exterior Width
15 1/8"
Exterior
Height
FRONT VIEW
TOP VIEW
SIDE VIEW
REAR VIEW
ELECTRICAL
ELECTRICAL
ELECTRICAL
13"
8"
10 3/8"
Summary of Contents for 742HW
Page 18: ...18 SCHEMATIC WIRING DIAGRAM...
Page 20: ...20...
