Thermo Scientific TriPlus RSH, User Manual

Page: 130 / 258

3
Setup Menu Item
Setup Menu Item Modules
104 TriPlus RSH User Guide Thermo Scientific
Chromatograph System
The Chromatograph System is a bundle of Input and Output Signals dedicated for a
chromatographic system. This bundle must be configured and can be assigned to a specific
chromatographic system for routine use. This minimizes erroneous functions and simplifies
the user interface.
This is the last step in the setting up and synchronization of Input/Output Signals between
the TriPlus RSH system and the external device. See also the section “Input/Output Interface”
on page 106 , and the section “Signals” on page 124 .
Upon selecting the list item Chromatograph System , the following parameters are available
for modification. See Figure 77 .
• GC1 = Name for GC System No.1
• (GC) = Class description GC System
Figure 77. Chromatography System - Selection and Parameters
Press Enter to edit a parameter. See Table 37 .
Teach Module The positions of the X-, Y-, and Z-axes can be defined again,
teaching.
Scan Barcode Checks the Barcode Reader. Hold a barcode label in the
beam of the laser and activate
Scan Barcode . A beep tone
signals a successful reading
Table 36. Options Menu Item Check Teaching (Sheet 2 of 2)
Item Description