Thermo Scientific SOLA II Flare, User Manual

Page: 49 / 164

Thermo Scientific SOLA II Flare User Manual 5-1
Chapter 5: Configuration
There are five top-level menus; this chapter addresses the Configuration menu.
The Configuration menu contains eight setup menus:
Analyzer Setup , Clock
Setup , Modbus Setup , Inject Setup , Alarms Setup , Calibration , Validation
Setup and 4–20 mA Range Setup .
S L I I - F 4 . 4 1 1 / 1 8 / 1 3
C o n f i g u r a t i o n
 
E n t E x i t
Figure 5-1. Top-level configuration menu
Analyzer Setup
1. Access the submenus within the Analyzer Setup menu by pressing
Enter.
C o n f i g u r a t i o n
A n a l y z e r S e t u p
 
E n t E x i t
Figure 5-2.
2. The first submenu is Program Passcode. The factory default is 0000. If
the passcode remains 0000, you are not required to enter the passcode
to access the menus. Change the passcode to prevent unauthorized
access to the menus.
A n a l y z e r S e t u p
P r o g r a m P a s s c o d e
 
E n t E x i t
Figure 5-3.